Kia Sedona: Hood Weatherstrip Repair procedures - Hood - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Hood Weatherstrip Repair procedures

Third generation YP (2014-2020) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Hood / Hood Weatherstrip Repair procedures

Replacement
1.
Remove the glue on both ends (A) of the hood weatherstrip (B).
   
Be careful not to scratch the hood weatherstrip.

2.
Install in the reverse order of removal.
Hood Insulator Pad Repair procedures
Replacement 1. Using a clip remover, detach the clips, and remove the hood insulator pad (A).     • Be careful not to scratch the hood panel. 2. Install ...

Hood Latch Release Handle Components and Components Location
Component Location 1. Hood latch release handle ...

Other Information:

Rear Hub - Carrier Repair procedures
Removal 1. Remove the front wheel and tire (A) from front hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)     Be careful not to dama ...

Description and Operation
System Configuration PAS consists of 8 sensors (4 front & 4 rear) that detect obstacles and transmit the result separately in three warning levels, the first, second and third to IPM (BCM) ...

Categories

Copyright © www.kisedona.com 2016-2020