Component Location |
1. Hood assembly |
Front Stabilizer Bar Repair procedures
Removal
1.
Loosen the bolt (A) and then disconnect the universal joint assembly from the pinion of the steering gear box.
Tightening torque:
32.4 ~ 37.3N.m (3.3 ~ 3.8kgf.m, 23.9 ~ 27.5lb-ft)
...
If the engine does not start
If engine doesn't turn over or turns over slowly
1.If your vehicle has an automatic transaxle, be sure the shift lever is in N
(Neutral) or P (Park) and the emergency brake is set.
2.Check the ...