Kia Sedona: Heater Unit Components and Components Location| Component Location |

| 1. Heater Unit |
| Components |
| [LH] |

| 1. Joint Flange Pad 2. Evaporator Tube Seal 3. Evaporator Core Assembly 4. Mode Actuator Assembly 5. Mode Cam 6. Heater Core Cover 7. Heater Core & Seal Assembly 8. Temp Actuator Motor Assembly [LH] 9. Antinoise Pad | 10. Ventilation Guide 11. Shower Duct [LH] 12. PTC Heater 13. Antinoise Pad 14. Heater & Evaporator Lower Case 15. Heater & Evaporator Case [LH] 16. Lower Case 17. Drain Hose |
| [RH] |

| 1. Separator 2. Defog Door 3. Heater Seal 4. Vent Door 5. Floor Door 6. Temperature Door [Manual] 7. Temperature Door [LH] 8. Temperature Door [RH] | 9. Ventilation Guide 10. Heater & Evaporator Case [RH] 11. Auto Defogging Actuator 12. Air Aspirator hose 13. Temp Actuator Motor Assembly [RH] 14. Evaporator Temperature Sensor 15. Shower Duct [RH] 16. Cooling Box Hose |
Heater
Heater Unit Repair proceduresDynamic Damper Components and Components Location
Components
1. BJ assembly2. BJ circlip3. BJ boot band4. BJ boot5. Dynamic damper band6. Dynamic damper7. Shaft8. TJ boot band9. TJ boot10. Spider assembly11. Retainer ring12. TJ housing13. Housin ...
TPMS Sensor Repair procedures
Removal
1.
Remove the tire.
(Refer to Tires/Wheels - "Tire")
2.
Remove the screw with torx driver (A).
•
When installing the bead brake, make sure tha ...