Kia Sedona: Heated Steering wheel Description and Operation - Steering wheel - Steering System - Kia Sedona YP Service ManualKia Sedona: Heated Steering wheel Description and Operation

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Steering System / Steering wheel / Heated Steering wheel Description and Operation

Description
When manually selected, the heated steering wheel system improves the thermal comfort of the driver by heating the steering wheel.
Heated pad

Item
Specification
Voltage
13.5 V
Heated pad resistance
1.5 ~ 1.9 Ω
NTC resistance
10.0 kΩ  ± 10% (25°C)

Repair procedures
Removal 1. Disconnect the battery negative cable from the battery and then wait for at least 30 seconds. 2. Turn the steering wheel so that the front wheels can face straight ahead. 3. R ...

Heated Steering wheel Schematic Diagrams
System Circuit Diagram ...

Other Information:

Components and Components Location
Components     1) SVM unit basically uses C-CAN signal only to communicate about the vehicle''s condition. • Steering wheel angle sensor : C-CAN • Veh ...

Starter Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal. 2. Remove the engine room under cover. (Refer to Engine Mechanical System - "Engine Room Under Cover" ...

Categories

Copyright © www.kisedona.com 2016-2026