Kia Sedona: Front Wheel Guard Repair procedures

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Body Side Moulding / Front Wheel Guard Repair procedures

Replacement

Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Take care not to scratch the body surface.

1.	Remove the front tire.

2.	Remove the front mud guard. (Refer to Body Side Moulding - "Front Mud Guard")

3.	After loosening the mounting clips and screws, remove the front wheel guard (A).

Install in the reverse order of removal.

Replace any damaged clips.

Rear Spoiler Repair procedures

Replacement Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, an ...

Rear Wheel Guard Repair procedures

Replacement Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, an ...

Other Information:

Checking the amount of air conditioner refrigerant and compressor lubricant
When the amount of refrigerant is low, the performance of the air conditioning is reduced. Overfilling also has a negative influence on the air conditioning system. Therefore, if abnormal operation ...

Blind Spot Detection Switch Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the crash pad lower switch (A) after loos ...

Kia Sedona: Front Wheel Guard Repair procedures

Rear Spoiler Repair procedures

Rear Wheel Guard Repair procedures

Other Information:

Categories