Kia Sedona: Front Seat Shield Inner Cover Repair procedures - Front Seat - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Front Seat Shield Inner Cover Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Front Seat / Front Seat Shield Inner Cover Repair procedures

Replacement
   
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Put on gloves to protect your hands.
1.
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
2.
After loosening the mounting screw, remove the front seat shield inner cover (A).

3.
Install in the reverse order of removal.
   
Replace any damaged clips.
Front Seat Shield Inner Cover Components and Components Location
Component Location 1. Front seat shield inner cover ...

Front Seat Back Cover Components and Components Location
Component Location 1. Front seat back cover ...

Other Information:

Front fog lamp bulbs
Type A Type B 1. Remove the front bumper under cover. 2. Reach your hand into the back of the front bumper. 3. Disconnect the power connector from the socket. 4. Remove the bulb-socket from ...

Tire specification and pressure label
The tires supplied on your new vehicle are chosen to provide the best performance for normal driving. The tire label located on the driver's side center pillar gives the tire pressures reco ...

Categories

Copyright © www.kisedona.com 2016-2026