Kia Sedona: Brake Line Components and Components Location

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Brake System / Brake System / Brake Line Components and Components Location

Master Cylinder Repair procedures

Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the air cleaner assembly (A). 3. Disconnect the brake fluid level switch connector (B), and rem ...

Brake Line Repair procedures

Removal 1. Disconnect the brake fiuid level switch connector, and remove the reservoir cap. 2. Remove the brake fluid from the master cylinder reservior with a syringe.   &nb ...

Other Information:

Repair procedures
Component Replacement After Deployment     Before performing any SRS repairs, use the GDS to check for DTCs. Refer to the Diagnostic Trouble Code list for repairing relat ...

Rear Temperature Control Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. 3. Verify that the actuator operates to the recirculation position when 12V is connect ...