Kia Sedona: Engine Mounting Components and Components Location

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Engine Mechanical System / Engine And Transaxle Assembly / Engine Mounting Components and Components Location

Engine Room Under Cover Repair procedures

Removal Engine Room Front Under Cover 1. Remove the engine room front under cover (A). Tightening torque : 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft) 2. Install in the reverse or ...

Engine Mounting Repair procedures

Removal and Installation Engine Mounting Bracket 1. Disconnect the battery negative terminal. 2. Install the jack to the edge of the lower oil pan (A) to support the engine. &n ...

Other Information:

Transaxle Oil Temperature Sensor Description and Operation
Description • The sensor used is a thermistor (NTC) in which resistance changes with temperature variation. • The TCM supplies about 5 voltage to the sensor; the output value ...

Wheel Repair procedures
Hub nut tightening sequence Tighten the hub nuts as follows. Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     When using an impact gun, fin ...