Kia Sedona: Emission Control System

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Emission Control System

Starter Relay Repair procedures

Inspection 1. Turn ignition switch OFF and disconnect the negative (-) battery terminal. 2. Remove the fuse box cover. 3. Remove the starter relay (A). 4. Check for continuity between ...

Specifications

Specifications Purge Control Solenoid Valve (PCSV) ▷ Specification ItemSpecificationCoil Resistance (Ω)22.0 ~ 26.0 [20°C(68°F)] Fuel Tank Pressure Sensor (FTPS) ▷ Type: Piezo-Resi ...

Other Information:

Variable Intake Solenoid (VIS) Valve Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance between the VIS valve terminals 1 and 2. 4. Check that the resistance is within ...

Brake Line Repair procedures
Removal 1. Disconnect the brake fiuid level switch connector, and remove the reservoir cap. 2. Remove the brake fluid from the master cylinder reservior with a syringe.   &nb ...