Kia Sedona: Specifications - Emission Control System - Kia Sedona YP Service ManualKia Sedona: Specifications

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Emission Control System / Specifications

Specifications
Purge Control Solenoid Valve (PCSV)
â–· Specification
Item
Specification
Coil Resistance (Ω)
22.0 ~ 26.0 [20°C(68°F)]

Fuel Tank Pressure Sensor (FTPS)
â–· Type: Piezo-Resistive Pressure Sensor
â–· Specification
Pressure (kPa)
Output Voltage (V)
-6.67
0.5
0
2.5
+6.67
4.5

Canister Close Valve (CCV)
â–· Specification
Item
Specification
Coil Resistance (Ω)
19.5 ~ 22.5 [20°C(68°F)]

Tightening Torques
Item
kgf.m
N.m
lb-ft
Positive Crankcase Ventilation (PCV) Valve
0.8 ~ 1.2
7.8 ~ 11.8
5.8 ~ 8.7
Canister mounting bolt
0.4 ~ 0.6
3.9 ~ 5.9
2.9 ~ 4.3
Fuel tank air filter mounting bolt
0.4 ~ 0.6
3.9 ~ 5.9
2.9 ~ 4.3

Emission Control System
...

Components and Components Location
Components Location 1. PCV Valve2. Canister3. Purge Control Solenoid Valve (PCSV)4. Fuel Tank Pressure Sensor (FTPS)5. Canister Close Valve (CCV)6. Fuel Level Sender (FLS)7. Fuel Tank Air Filt ...

Other Information:

Purge Control Solenoid Valve (PCSV) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the PCSV connector. 3. Measure resistance between the PCSV terminals 1 and 2. 4. Check that the resistance is within the speci ...

KEY OUT indicator
When the ENGINE START/STOP button is in the ACC or ON position, if any door is open, the system checks for the smart key. If the smart key is not in the vehicle, the indicator will blink, and if ...

Categories


Copyright © www.kisedona.com 2016-2025