1. Put the front anchor strikers along the front anchors on the floor.
2. Insert two front anchor strikers into the front anchors.
3. Lift the rear portion of the seat cushion then push down firmly to lock the catches into the rear anchors until an audible
Mode Control Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the mode control actuator connector.
3.
Verify that the mode control actuator operates to the defrost mode when 12V is connected t ...
Valve Body Description and Operation
Description
The components of the valve body
•
Regulator valve (hydraulic control)
•
Redirection valves (change the direction of ATF flow)
•
Shift valve (shifting ...