Kia Sedona: Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sedona YP Service ManualKia Sedona: Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications

Specification
Item
Specification
Control type
N/H (Normal High)
"Control pressure kpa (kgf/cm², psi)"
"500.14 ~ 9.81 (5.1 ~ 0.1, 72.54 ~ 1.42)"
Current value (mA)
50 ~ 850
Coil resistance(Ω)
5.1 ± 0.3

26 Brake Control Solenoid Valve(26/B_VFS) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery") 3. Disconnect the solenoid valve connector (A). 4. Me ...

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Components and Components Location
Component Location 1. Underdrive brake control solenoid valve (UD/B_VFS) ...

Other Information:

Compression Test
Compression Pressure Inspection     If there is lack of power, excessive oil consumption or poor fuel economy, measure the compression pressure. 1. Warm up the engine t ...

Automatic turn off function
The interior lights automatically turn off approximately 20 minutes after the ignition switch is turned off, if the lights are in the ON position. If your vehicle is equipped with the theft alarm s ...

Categories

Copyright © www.kisedona.com 2016-2026