Kia Optima Manuals

Kia Sedona: TPMS Sensor Description and Operation - Tire Pressure Monitoring System - Suspension System - Kia Sedona YP Service ManualKia Sedona: TPMS Sensor Description and Operation

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Suspension System / Tire Pressure Monitoring System / TPMS Sensor Description and Operation

Description

1.
Function
•
By detecting the pressure, temperature, acceleration, and battery condition, transmit information to ECU by a wireless RF.
•
2.
Structure and features
•
In a vehicle, there are 4 TPMS sensors, installed to each wheel.
•
Frequency is changed by FSK, and High Line is used in common.
3.
Mode
•
It is consists of the initial factory mode (EOL test mode), the stop and driving mode, and the automatic learning mode.
Troubleshooting
TPMS Inspection method Inspection     Find the inspection number by referring to the table above. The following content is irrelevant of the inspection procedure. 1. ...

TPMS Sensor Repair procedures
Removal 1. Remove the tire. (Refer to Tires/Wheels - "Tire") 2. Remove the screw with torx driver (A).     • When installing the bead brake, make sure tha ...

Other Information:

Front windshield washers
In the OFF position, pull the lever gently toward you to spray washer fluid on the windshield and to run the wipers 1-3 cycles. Use this function when the windshield is dirty. The spray and wipe ...

Repair procedures
Teaching Procedures 1. Key Teaching Procedure Key teaching must be done after replacing a defective PCM (ECM) or when providing additional keys to the vehicle owner. The procedure starts with ...

Categories

Copyright © www.kisedona.com 2016-2025