Kia Sedona: Sunroof - Features of your vehicle - Kia Sedona YP Owners ManualKia Sedona: Sunroof

Third generation YP (2014-2020) / Kia Sedona YP Owners Manual / Features of your vehicle / Sunroof

Front

Rear

If your vehicle is equipped with a sunroof, you can slide or tilt your sunroof with the sunroof control lever located on the overhead console.

The sunroof can only be opened, closed, or tilted when the ignition switch is in the ON position.

The sunroof can be operated for approximately 30 seconds after the ignition key is removed or turned to the ACC or LOCK (or OFF) position. However, if the front door is opened, the sunroof cannot be operated even within the 30 second period.

CAUTION - Sunroof motor damage

To prevent damage to the sunroof, periodically remove any dirt that may accumulate on the guide rail.

In cold and wet climates, the sunroof may not work properly due to freezing conditions. After the vehicle is washed or in a rainstorm, be sure to wipe off any water that is on the sunroof before operating it.

CAUTION - Sunroof control lever

Do not continue to press the sunroof control lever after the sunroof is fully opened, closed, or tilted. Damage to the motor or system components could occur

WARNING - Roof cargo

Do not operate the sun roof while using the roof rack to transport cargo.This may cause the cargo to come loose and distract the driver.

Emergency fuel filler lid release
If the fuel filler lid does not open using the remote fuel filler lid release, you can open it manually by pulling the handle outward slightly. CAUTION Do not pull the handle excessively, ot ...

Sliding the sunroof
To open the sunroof, pull the sunroof control lever backward. To close the sunroof, push the sunroof control lever forward. To open the sunroof automatically : Pull the sunroof control lever back ...

Other Information:

Intake Air Temperature Sensor (IATS) Description and Operation
Description Integrated into the Barometric Pressure Sensor (BPS), the Intake Air Temperature Sensor (IATS) detects the intake air temperature. To calculate precise air quantity, correction of th ...

Engine Control Module (ECM) Terminal Function
ECM Terminal And Input/Output signal ECM Terminal Function Connector [E100-A] Pin No.DescriptionConnected to1- 2- 3- 4Immobilizer Lamp control outputImmobilizer Lamp [Without Button E ...

Categories

Copyright © www.kisedona.com 2016-2020