Kia Sedona: Special Service Tools - Engine Control / Fuel System - Kia Sedona YP Service ManualKia Sedona: Special Service Tools

Third generation YP (2014-2019) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Special Service Tools

Special Service Tools
Tool Name / Number
Illustration
Description
Fuel Pressure Gauge and hose
09353-24100

Used for measuring the pressure in fuel line
Fuel Pressure Gauge Adapter
09353-38000

Used for connecting between high pressure fuel pump and low pressure fuel feed tube to measure the pressure in fuel line
Heated Oxygen Sensor Socket Wrench
09392-1Y100

Removal and installation of the heated oxygen sensor

※ SST No.09392-2H100 model also can be used for removing the Heated Oxygen Sensor.
Torque Wrench Socket (17mm)
09314-3V100

Removal and installation of the high pressure fuel pipe
Injector Combustion Seal Guide & Sizing tool
09353-2B000

Used for installing injector combustion seal on injector
Fuel pump plate cover remover
09310-B8100

Removal and installation of the fuel pump

Components and Components Location
Components Location 1. Engine2. Fuel tank & Filler neck assembly ...

Troubleshooting
Basic Troubleshooting Basic Troubleshooting Guide Customer Problem Analysis Sheet Basic Inspection Procedure Measuring Condition of Electronic Parts'' Resistance The measured resistance at high ...

Other Information:

Intake Air Temperature Sensor (IATS) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the IATS connector. 3. Measure resistance between the IATS terminals 3 and 4. 4. Check that the resistance is within the speci ...

Adjusting the height up and down
To raise the headrest, pull it up to the desired position (1). To lower the headrest, push and hold the release button (2) on the headrest support and lower the headrest to the desired position ...

Categories

Copyright В© www.kisedona.com 2016-2019