Kia Sedona: Vehicle data collection and event data recorders - Introduction - Kia Sedona YP Owners ManualKia Sedona: Vehicle data collection and event data recorders

Third generation YP (2014-2020) / Kia Sedona YP Owners Manual / Introduction / Vehicle data collection and event data recorders

This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle's systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less. The EDR in this vehicle is designed to record such data as:

These data can help provide a better understanding of the circumstances in which crashes and injuries occur. NOTE: EDR data are recorded by your vehicle only if a non-trivial crash situation occurs; no data are recorded by the EDR under normal driving conditions and no personal data (e.g., name, gender, age, and crash location) are recorded. However, other parties, such as law enforcement, could combine the EDR data with the type of personally identifying data routinely acquired during a crash investigation.

To read data recorded by an EDR, special equipment is required, and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement, that have the special equipment, can read the information if they have access to the vehicle or the EDR.

Vehicle break-in process
No special break-in period is needed. By following a few simple precautions for the first 600 miles (1,000 km) you may add to the performance, economy and life of your vehicle. Do not race the ...

Your vehicle at a glance
...

Other Information:

Components and Components Location
Component Location 1. Wi-Fi antenna (AVN Only)2. External amplifier3. Roof antenna4. AVN head unit (with UVO)5. UVO unit (UVO Audio Only) ...

Exhaust Manifold Repair procedures
Removal and Installation [LH Exhaust Manifold] 1. Disconnect the battery negative terminal. 2. Remove the engine cover. (Refer to Engine and Transaxle Assembly - "Engine Cover") 3. Remov ...

Categories

Copyright В© www.kisedona.com 2016-2020