Kia Sedona: Smart Tailgate Unit Repair procedures - Smart Tailgate System - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: Smart Tailgate Unit Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body Electrical System / Smart Tailgate System / Smart Tailgate Unit Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the luggage side trim [RH].
(Refer to Body - "Luggage Side Trim")
3.
Disconnect the smart tailgate unit connector (A).

4.
Remove the smart tailgate unit (A) after loosening the nuts.

Installation
1.
Install the smart tailgate unit.
2.
Connect the smart tailgate unit connector.
3.
Install the luggage side trim [RH].
4.
Connect the negative (-) battery terminal.
Smart Tailgate Unit Schematic Diagrams
Circuit Diagram ...

Smart Tailgate Latch Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the tail gate trim. (Refer to Body - "Tail Gate Trim") 3. Disconnect the smart tailgate latch and PCU assembly connector ...

Other Information:

BJ Boot Repair procedures
Removal 1. Remove the front driveshaft. (Refer to Driveshaft Assembly - “Front Driveshaft”) 2. Remove the TJ joint assembly. (Refer to Driveshaft Assembly - “TJ Joint”) 3. Rem ...

Noise and smoke
When inflated, the air bags make a loud noise and leave smoke and powder in the air inside the vehicle. This is normal and is a result of the ignition of the air bag inflator. After the air bag in ...

Categories

Copyright © www.kisedona.com 2016-2026