Kia Sedona: Shift Cable Components and Components Location

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Shift Cable Components and Components Location

Shift Lever Repair procedures

Removal 1. Move the shift lever to "N" range. 2. Disconnect the battery negative (-) cable. 3. Remove the knob (A) and boots (B) by pulling them in the direction of the arrow after separ ...

Shift Cable Repair procedures

Removal 1. Move the shift lever to "N" range. 2. Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner) 3. Remove the battery and battery tray. (Refer to Eng ...

Other Information:

Detecting sensor
The sensors are located inside of the rear bumper. Always keep the rear bumper clean for the system to work properly. ...

Auto Defogging Sensor (DATC only) Description and Operation
Description The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal to blow out wind for defogging if moisture occurs. On receiving the signal from ...