Kia Sedona: Sensor to detect distance to the vehicle ahead - Vehicle to vehicle distance setting (SCC) - Smart cruise control system (SCC) - Driving your vehicle - Kia Sedona YP Owners ManualKia Sedona: Sensor to detect distance to the vehicle ahead

Third generation YP (2014-2021) / Kia Sedona YP Owners Manual / Driving your vehicle / Smart cruise control system (SCC) / Vehicle to vehicle distance setting (SCC) / Sensor to detect distance to the vehicle ahead

The sensor detects distance to the vehicle ahead.

If the sensor is covered with dirt or other foreign matter, the vehicle to vehicle distance control may not operate correctly.

Always keep the sensor clean.

Sensor malfunction indicator

If the sensor or cover is dirty or obscured with foreign matter such as snow, the indicator will illuminate. Clean the sensor by using a soft cloth.

SCC malfunction indicator

The warning light illuminates when the vehicle to vehicle distance control system is not functioning normally.

Take your vehicle to an authorized Kia dealer and have the system checked.

CAUTION

To set vehicle to vehicle distance
This function allows you to program the vehicle to maintain relative distance to the vehicle ahead without depressing the accelerator pedal or brake pedal. The vehicle to vehicle distance will au ...

To adjust the sensitivity of Smart Cruise Control
The sensitivity of vehicle speed when following the front vehicle to maintain the set distance can be adjusted. Go to the User Settings Mode (Driving Assist) and select SCC (Smart Cruise Control ...

Other Information:

Position & Tail light
When the light switch is in the parking light position, the tail, license and instrument panel lights will turn ON. ...

Brake Line Repair procedures
Removal 1. Disconnect the brake fiuid level switch connector, and remove the reservoir cap. 2. Remove the brake fluid from the master cylinder reservior with a syringe.   &nb ...

Categories

Copyright В© www.kisedona.com 2016-2021