Kia Sedona: CVVT Oil Control Valve (OCV) Specifications - Engine Control System - Engine Control / Fuel System - Kia Sedona YP Service ManualKia Sedona: CVVT Oil Control Valve (OCV) Specifications

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Engine Control System / CVVT Oil Control Valve (OCV) Specifications

Specification
Item
Specification
Coil Resistance (Ω)
9.4 ~ 10.4 [20°C(68°F)]

Purge Control Solenoid Valve (PCSV) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the PCSV connector. 3. Measure resistance between the PCSV terminals 1 and 2. 4. Check that the resistance is within the speci ...

CVVT Oil Control Valve (OCV) Description and Operation
Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by ...

Other Information:

Removable towing hook (front)
1.Remove the towing hook from the tool case. 2.Remove the hole cover pressing the lower part of the cover on the front bumper. 3.Install the towing hook by turning it clockwise into the hole until ...

Auto Defogging Sensor (DATC only) Description and Operation
Description The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal to blow out wind for defogging if moisture occurs. On receiving the signal from ...

Categories


Copyright © www.kisedona.com 2016-2024