Kia Sedona: Injector Description and Operation
Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Engine Control System / Injector Description and Operation
| Description |
Based on information from various sensors, the ECM can
calculate the fuel amount to be injected. The fuel injector is a
solenoid-operated valve and the fuel injection amount is controlled by
length of injection time. The ECM controls each injector by grounding
the control circuit. When the ECM energizes the injector by grounding
the control circuit, the circuit voltage should be low (theoretically
0V) and the fuel is injected. When the ECM de-energizes the injector by
opening control circuit, the fuel injector is closed and circuit voltage
should momentarily peak, and then settle at system voltage.
Injector Specifications
Specification
ItemSpecificationCoil Resistance (Ω)0.98 ~ 1.14 [20°C(68°F)]
...
Injector Schematic Diagrams
Circuit Diagram
...
Other Information:
Repair procedures
Inspection
1.
Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column.
2.
Check for continuity between the terminals.
3.
If continu ...
Antenna
Your vehicle uses a roof antenna to receive AM or/and FM broadcast signals.
When reinstalling your roof antenna, it is important that it is fully tightened
and adjusted to the upright position to ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2026 Owners Manual
- Kia Sedona YP 2014-2026 Service Manual
Copyright © www.kisedona.com 2016-2026