Kia Sedona: Fuel Tank Pressure Sensor (FTPS) Description and Operation
Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Engine Control System / Fuel Tank Pressure Sensor (FTPS) Description and Operation
| Description |
Fuel Tank Pressure Sensor (FTPS) is a component of the
evaporative emission control system and is installed on the fuel tank,
the fuel pump, or the canister. It checks the purge control solenoid
valve operation and detects a leakage of the system.
Fuel Tank Pressure Sensor (FTPS) Specifications
Specification
ItemSpecificationSupply Voltage (V)5Operation Voltage (V)4.75 ~ 5.25
Pressure [kPa (kgf/cm², psi)]Output Voltage (V) [Ref=5V]-6.67 (-0.06, -0.97)0.502.5+6.67 (0.068, 0.97)4.5
...
Fuel Tank Pressure Sensor (FTPS) Schematic Diagrams
Circuit Diagram
...
Other Information:
Rear Wheel Speed Sensor Repair procedures
Removal
1.
Remove the rear wheel speed sensor connector (A).
2.
Remove the rear wheel speed sensor.
(Refer to Driveshaft and Axle - "Rear Hub - Carrier")
3.
Install in the reverse order o ...
Description and Operation
OBD-II review
1. Overview
The California Air Resources Board (CARB) began regulation of
On Board Diagnostics (OBD) for vehicles sold in California beginning
with the 1988 model year. The first ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2026 Owners Manual
- Kia Sedona YP 2014-2026 Service Manual
Copyright © www.kisedona.com 2016-2026