Kia Sedona: Catalytic Converter Repair procedures
Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Emission Control System / Exhaust Emission Control System / Catalytic Converter Repair procedures
| Removal |
| [Catalytic Converter (WCC)] |
| 1. |
Remove the exhaust manifold.
(Refer to Engine Mechanical System - "Exhaust Manifold")
|
| [Catalytic Converter (UCC)] |
| 1. |
Remove the Center Muffler.
(Refer to Engine Mechanical System - "Center Muffler")
|
| Installation |
| 1. |
Install in the reverse order of removal. |
Catalytic Converter Description and Operation
Description
The catalytic converter of the gasoline engine is a three-way
catalyst. It oxidizes carbon monoxide and hydrocarbons (HC), and
separates oxygen from the oxides of nitrogen (NOx). ...
CVVT (Continuous Variable Valve Timing) System Description and Operation
Description
Continuous Variable Valve Timing (CVVT) system advances or
retards the valve timing of the intake and exhaust valve in accordance
with the ECM control signal which is calculated by ...
Other Information:
Blind Spot Detection Radar Calibration Description and Operation
Description
To correctly sense vehicles on the neighboring lanes using
the radar, the direction of the sensor and the direction of the vehicle
must be aligned.
This is the BSD unit alignment. ...
Transaxle Control Module (TCM) Repair procedures
Inspection
1.
TCM ground circuit test: Measure resistance between TCM and
chassis ground using the backside of TCM harness connector as TCM side check point.
Specification: Below 1Ω
...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2025 Owners Manual
- Kia Sedona YP 2014-2025 Service Manual
Copyright В© www.kisedona.com 2016-2025