Kia Sedona: Positive Crankcase Ventilation (PCV) Valve Repair procedures - Crankcase Emission Control System - Emission Control System - Kia Sedona YP Service ManualKia Sedona: Positive Crankcase Ventilation (PCV) Valve Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Emission Control System / Crankcase Emission Control System / Positive Crankcase Ventilation (PCV) Valve Repair procedures

Removal
1.
Release the PCV pad.

2.
Disconnect the vapor hose (A).
3.
Remove the PCV valve (B).

Inspection
1.
Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger moves.

   
If the plunger does not move (PCV valve is clogged), clean or replace the valve.
Installation
1.
Install in the reverse order of removal.

PCV Valve :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

Positive Crankcase Ventilation (PCV) Valve Description and Operation
Operation Principle ...

Evaporative Emission Control System
...

Other Information:

Description and Operation
Warning Lamp Activation Warning Lamp Behavior after Ignition On As soon as the operating voltage is applied to the SRSCM ignition input, the SRSCM activates the warning lamp for a lamp check. T ...

Seat belts - Front passenger and rear seat 3-point system with combination locking retractor
To fasten your seat belt : Combination retractor type seat belts are installed in the rear seat positions to help accommodate the installation of child restraint systems. Although a combination r ...

Categories

Copyright © www.kisedona.com 2016-2026