Kia Sedona: ESC OFF Switch Description and Operation - ESC(Electronic Stability Control) System - Brake System - Kia Sedona YP Service ManualKia Sedona: ESC OFF Switch Description and Operation

Third generation YP (2014-2020) / Kia Sedona YP Service Manual / Brake System / ESC(Electronic Stability Control) System / ESC OFF Switch Description and Operation

Description
1.
The ESP OFF switch is used by users to turn off the ESP system.
2.
The ESP OFF lamp is on when ESP OFF switch is engaged.
Yaw-rate and G Sensor Repair procedures
Removal 1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least thirty seconds before beginning work. 3. Remove the floor console. (Re ...

ESC OFF Switch Repair procedures
Inspection 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel. (Refer to Body - "Crash pad lower panel") 3. Remove the crash pa ...

Other Information:

Spark Plug Repair procedures
Inspection [On vehicle inspection] 1. Accelerate the engine to about 3,000 rpm 3 times or more. 2. Remove the spark plug. 3. Check the spark plug visually. If the electrode is dry, the ...

Accelerator Position Sensor (APS) Description and Operation
Description Accelerator Position Sensor (APS), installed on the accelerator pedal module, detects the rotation angle of the accelerator pedal. The APS, one of the most important sensors in engi ...

Categories

Copyright В© www.kisedona.com 2016-2020