Kia Sedona: Idler Components and Components Location - Timing System - Engine Mechanical System - Kia Sedona YP Service ManualKia Sedona: Idler Components and Components Location

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Engine Mechanical System / Timing System / Idler Components and Components Location

Components

1. Idler

Drive Belt Repair procedures
Removal and Installation 1. Remove the engine room under cover and engine room RH side cover. (Refer to Engine And Transaxle Assembly - "Engine Room Under Cover") 2. To release the tension, t ...

Idler Repair procedures
Removal and Installation 1. Remove the drive belt. (Refer to Timing System - "Drive Belt") 2. Remove the drive belt idler (A). Tightening torque : 53.9 ~ 57.9 N.m (5.5 ~ 5.9 kgf.m, 39.8 ...

Other Information:

Anti-lock Brake System (ABS) Warning Light
This warning light illuminates : Once you set the ignition switch or Engine Start/Stop Button to the ON position. - It illuminates for approximately 3 seconds and then goes off. When there i ...

Engine Coolant Temperature Gauge
This gauge indicates the temperature of the engine coolant when the ignition switch or Engine Start/Stop button is ON. If the gauge pointer moves beyond the normal range area toward the ...

Categories


Copyright В© www.kisedona.com 2016-2024