Kia Sedona: Idler Repair procedures - Timing System - Engine Mechanical System - Kia Sedona YP Service ManualKia Sedona: Idler Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Engine Mechanical System / Timing System / Idler Repair procedures

Removal and Installation
1.
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
2.
Remove the drive belt idler (A).

Tightening torque :
53.9 ~ 57.9 N.m (5.5 ~ 5.9 kgf.m, 39.8 ~ 42.7 lb-ft)

3.
Install in the reverse order of removal.
Inspection
Check the idler for excessive oil leakage, abnormal rotation or vibration. Replace if necessary.
Idler Components and Components Location
Components 1. Idler ...

Drive Belt Tensioner Components and Components Location
Components 1. Drive belt tensioner ...

Other Information:

Rear Door Curtain Assembly Repair procedures
Replacement     Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and ...

Heater & A/C Control Unit (DATC) Components and Components Location
Components (1) Control Panel (AUDIO Type) Connector Pin Function Connector Pin NoFunctionConnector Pin NoFunctionA1ILL+ (TAIL)A29CLEAN CIGNAL2SENSOR REF (+5V)30-3-31-4-32-5MODE ACT' ...

Categories

Copyright © www.kisedona.com 2016-2026