The High Beam Assist is a system that automatically adjusts the headlamp range (switches between high beam and low beam) according to the brightness of other vehicles and road conditions.
Operating condition
1. Place the light switch in the AUTO position.
2. Turn on the high beam by pushing the lever away from you. The High Beam Assist () indicator will illuminate.
3. The High Beam Assist will turn on when vehicle speed is above 45km/h (24.8mph).
4. If the light switch is placed to the headlamp position, the High Beam Assist will turn off and the low beam will be on continuously.
The high beam switches to low beam in the below conditions.
- When the High Beam Assist is off.
- When the light switch is not in the AUTO position.
- When the headlamp is detected from the on-coming vehicle.
- When the tail lamp is detected from the front vehicle.
- When the surrounding is bright enough high beam is not needed.
- When streetlights or other lights are detected.
- When vehicle speed is below 35km/h (21.7mph).
The system may not operate normally in the below conditions.
Key operations
Type A
Type B
Used to start the engine.
Used to lock and unlock the doors.
Used to lock and unlock the glove box.
To unfold the key, press the release button then the key will unfold au ...
Parking Brake Repair procedures
Inspection
Check whether the stroke is within specification when the
parking brake pedal is depressed with 66 lb, 294 N(30 kg) of force.
Also, the parking brake alone should securely hold the v ...