Kia Sedona: Rear Heater Core Repair procedures
Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Heating,Ventilation And Air Conditioning / Rear Heater / Rear Heater Core Repair procedures
| Replacement |
| 1. |
Disconnect the battery negative terminal. |
| 2. |
When the engine is cool, drain the engine coolant from the radiator.
(Refer to Engine Mechanical System - “Coolant”) |
| 3. |
Remove the luggage side trim [RH].
(Refer to Body - "Luggage Side Trim") |
| 4. |
Remove the rear heater core cover (A) after loosening screws.
|
| 5. |
Disconnect the rear heater hose (A) from rear heater core.
|
| 6. |
Remove the rear heater core (A) from the rear heater & A/C unit.
|
| 7. |
Install in the reverse order of removal. |
Rear Heater Unit Repair procedures
Replacement
1.
Disconnect the battery negative terminal.
2.
Recover the refrigerant with a recovery/ recycling/ charging station.
3.
When the engine is cool, drain the engine coolant from ...
Rear Evaporator Core Repair procedures
Replacement
1.
Remove the rear heater & A/C unit.
(Refer to Rear Heater - "Rear Heater Unit")
2.
Remove the rear heater & A/C lower case after loosening the screws.
3.
Remove the ...
Other Information:
Vehicle break-in process
No special break-in period is needed. By following a few simple precautions for
the first 600 miles (1,000 km) you may add to the performance, economy and life
of your vehicle.
Do not race the ...
Auto Defogging Sensor (DATC only) Description and Operation
Description
The auto defogging sensor is installed on the front window
glass. The sensor judges and sends signal to blow out wind for defogging
if moisture occurs. On receiving the signal from ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2025 Owners Manual
- Kia Sedona YP 2014-2025 Service Manual
Copyright © www.kisedona.com 2016-2025