Kia Sedona: Blower
Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Heating,Ventilation And Air Conditioning / Blower
- Blower Unit Components and Components Location
- Blower Unit Repair procedures
- Blower Motor Repair procedures
- Blower Resistor (Manual) Repair procedures
- Field Effect Transistor (DATC) Repair procedures
- Climate Control Air Filter Description and Operation
- Climate Control Air Filter Repair procedures
- Intake Actuator Description and Operation
- Intake Actuator Repair procedures
Mode Control Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the mode control actuator connector.
3.
Verify that the mode control actuator operates to the defrost mode when 12V is connected t ...
Blower Unit Components and Components Location
Components Location
1. Blower Unit
Components
1. Inlet Seal2. Intake Actuator3. Antinoise Pad4. Blower Upper Case5. Blower Lower Case6. Blower Motor7. Inlet Duct Upper Case8. Inlet Door As ...
Other Information:
Manifold Absolute Pressure Sensor (MAPS) Specifications
Specification
Pressure [kPa (kgf/cm², psi)]Output Voltage (V) [Ref=5V]20.0 (0.20, 2.90)0.7946.66 (0.47, 6.77)1.84101.32 (1.03, 14.7)4.0
...
Intake Actuator Description and Operation
Description
The intake actuator is located at the blower unit. It
regulates the intake door by a signal from the control unit. Pressing
the intake selection switch will shift between recirculat ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2026 Owners Manual
- Kia Sedona YP 2014-2026 Service Manual
Copyright © www.kisedona.com 2016-2026