Kia Sedona: Evaporator Temperature Sensor Description and Operation - Air conditioning System - Heating,Ventilation And Air Conditioning - Kia Sedona YP Service ManualKia Sedona: Evaporator Temperature Sensor Description and Operation

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Heating,Ventilation And Air Conditioning / Air conditioning System / Evaporator Temperature Sensor Description and Operation

Description
The evaporator temperature sensor detects the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator from freezing by excessive cooling.

A/C Pressure Transducer Repair procedures
Inspection 1. Measure the pressure of high pressure line by measuring voltage output between terminals “1” and “2”. 2. Inspect the voltage value to determine whether it is within speci ...

Evaporator Temperature Sensor Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the evaporator temperature sensor connector. 3. Measure resistance between terminals “+” and “-” of the evaporator tempera ...

Other Information:

Rear Door Side Weatherstrip Repair procedures
Replacement 1. Remove the clips (C) and remove the rear door side weatherstrip (A).     Butyl tape (B) and mounting clips (C) securely seated. 2. Install in the rev ...

Towing up hill
When towing a trailer on steep grades (in excess of 6%) pay close attention to the engine coolant temperature gauge to ensure the engine does not overheat. If the needle of the coolant tempera ...

Categories

Copyright © www.kisedona.com 2016-2026