Kia Sedona: Windshield Deicer Switch Repair procedures - Windshield Deicer - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: Windshield Deicer Switch Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body Electrical System / Windshield Deicer / Windshield Deicer Switch Repair procedures

Inspection
1.
The windshield deicer switch inputs can be checked using the GDS.
2.
To check the input value of windshield deicer switch, select option "Body Control Module".
3.
Select option "Current Data".

4.
To perform functional test on SJB outputs, select "Actuation Test".

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the heater & A/C control unit.
(Refer to Heating, Ventilation, Air Conditioning - "Heater & A/C Control Unit (DATC))
(Refer to Heating, Ventilation, Air Conditioning - "Heater & A/C Control Unit (Manual))
Installation
1.
Install the heater & A/C control unit.
(Refer to Heating, Ventilation, Air Conditioning - "Heater & A/C Control Unit (DATC))
(Refer to Heating, Ventilation, Air Conditioning - "Heater & A/C Control Unit (Manual))
2.
Connect the negative (-) battery terminal.
Windshield Deicer Repair procedures
Inspection 1. Remove the cowl top cover. (Refer to Body - "Cowl Top Cover") 2. Disconnect the windshield deicer connector (A). 3. Check for continuity between the terminals of deicer line ...

Windshield Wiper/Washer
...

Other Information:

Starting the engine
WARNING - Proper footwear Always wear appropriate shoes when operating your vehicle. Unsuitable shoes (high heels, ski boots,etc.) may interfere with your ability to use the brake and acceler ...

System operation
Ventilation 1. Set the mode to the position. 2. Set the air intake control to the outside (fresh) air position. 3. Set the temperature control to the desired position. 4. Set the fan speed contro ...

Categories

Copyright © www.kisedona.com 2016-2026