Kia Sedona: Anti-Pinch Strip Repair procedures - Smart Tailgate System - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: Anti-Pinch Strip Repair procedures

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Body Electrical System / Smart Tailgate System / Anti-Pinch Strip Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the tail gate trim.
(Refer to Body - "Tail Gate Trim")
3.
Disconnect the anti-pinch strip sensor connector (A).

4.
Remove the anti-pinch strip (A) after disconnecting the mounting clip.

Installation
1.
Install the smart tailgate anti-pinch strip.
2.
Disconnect the smart tailgate anti-pinch strip sensor connector.
3.
Install the tail gate trim.
4.
Connect the negative (-) battery terminal.
Smart Tailgate Latch Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the tail gate trim. (Refer to Body - "Tail Gate Trim") 3. Disconnect the smart tailgate latch and PCU assembly connector ...

STG Spindle Repair procedures
Removal [LH] 1. Disconnect the negative (-) battery terminal. 2. Remove the tail gate trim [LH]. (Refer to Body - "Tail Gate Trim") 3. Disconnect the STG spindle connector (A). 4. Us ...

Other Information:

Heating and Ventilation
Air intake The air circulating in the passenger compartment is filtered and originates either from the exterior, via the grille located at the base of the windscreen, or from the inside in air reci ...

Rear Wheel Speed Sensor Components and Components Location
Components 1. Rear wheel speed sensor 2. Rear wheel speed sensor cable ...

Categories

Copyright В© www.kisedona.com 2016-2025