Kia Sedona: Lane Departure Warning System (LDWS) Unit Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body Electrical System / Lane Departure Warning System (LDWS) / Lane Departure Warning System (LDWS) Unit Repair procedures

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Remove the LDWS unit cover (A).

3.	Disconnect the LDWS unit connector (A).

Remove the LDWS unit after disengaging the mounting bracket (A).

When disengaging the mounting bracket, be careful not to be damaged it.

Installation

1.	Align LDWS unit with windshield bracket using forward edge point (A).

Engage snaps and pivot upward to lock point (B).

LDWS unit is fully assembled when a single click sound is heard.

3.	Connect the LDWS unit connector.

4.	Connect the negative (-) battery terminal.

Lane Departure Warning System (LDWS) Unit Components and Components Location

Components ...

Lighting System

...

Other Information:

Jump starting
Jump starting can be dangerous if done incorrectly. Therefore, to avoid harm to yourself or damage to your vehicle or battery, follow these jump starting procedures. If in doubt, we strongly recom ...

Removal and reinstallation
To remove the headrest : 1. Raise it as far as it can go then press the release button (1) while pulling the headrest up (2). To reinstall the headrest : 1. Put the headrest poles (3) into the ...

Kia Sedona: Lane Departure Warning System (LDWS) Unit Repair procedures

Lane Departure Warning System (LDWS) Unit Components and Components Location

Lighting System

Other Information:

Categories