Kia Sedona: Rear Seat Belt Retractor Repair procedures
[Second row seat belt retractor]
When installing the belt, make sure not to damage the retractor.
1.
Remove the rear pillar trim.
(Refer to Interior Trim - "Rear Pillar Trim")
2.
Remove the second row seat belt retractor (A) after loosening the bolt.
Tightening torque : 39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
3.
Install in the reverse order of removal.
•
Make sure the connector is plugged in properly.
•
Replace any damaged clips.
[Third row seat belt retractor]
When installing the belt, make sure not to damage the retractor.
1.
Remove the rear pillar trim.
(Refer to Interior Trim - "Rear Pillar Trim")
2.
Remove the third row seat belt lower anchor (A) after loosening the mounting bolt.
Tightening torque : 39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
3.
Remove the third row seat belt retractor (A) after loosening the mounting bolts.
4.
Install in the reverse order of removal.
•
Make sure the connector is plugged in properly.
•
Replace any damaged clips.
Component Location
1. Second row seat belt retractor2. Third row seat belt retractor
...
Component Location
1. Second row center seat belt retractor2. Third row center seat belt retractor
...
Other Information: Window opening and closing
The driver ...
Opening the hood
1. Pull the release lever to unlatch the hood. The hood should pop open slightly.
Open the hood after turning off the engine on a flat surface, shifting the shift
lever to the P (Park) position a ...