Replacement |
Put on gloves to protect your hands. |
|
1. |
Remove the caps (A) and screws, and then remove the assist handle (B). |
2. |
Install in the reverse order of removal. |
Troubleshooting
Basic Troubleshooting
Basic Troubleshooting Guide
Customer Problem Analysis Sheet
Basic Inspection Procedure
Measuring Condition of Electronic Parts'' Resistance
The measured resistance at high ...
Spark Plug Repair procedures
Inspection
[On vehicle inspection]
1.
Accelerate the engine to about 3,000 rpm 3 times or more.
2.
Remove the spark plug.
3.
Check the spark plug visually.
If the electrode is dry, the ...