Kia Sedona: Console Armrest Repair procedures - Floor Console - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Console Armrest Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Floor Console / Console Armrest Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Remove the rear console cover.
(Refer to Floor Console - "Rear Console Cover")
2.
After loosening the mounting screws, remove the console armrest (A).

3.
Install in the reverse order of removal.
   
Replace any damaged clips.
Console Armrest Components and Components Location
Component Location 1. Console armrest ...

Crash Pad
...

Other Information:

Schematic Diagrams
Circuit Diagram ...

Warning type
The system will activate when: 1.The system is on. 2.Vehicle speed is above 30 km/h (18.6 mph ). 3.Other vehicles are detected in the rear side. WARNING The Blind Spot Detection System with L ...

Categories

Copyright © www.kisedona.com 2016-2026