Kia Sedona: Power sliding door non-opening conditions
The power sliding door is not automatically opened, but closed under the following conditions. If the main or sub control button is pushed for power opening operation, the chime sounds once.
When the ignition switch is in the ON position,
1. Vehicle is moving above 5 km/h (3 mph).
2. The gearshift lever is not in P (Park) for automatic transaxle.
Power sliding door operation
Push the corresponding main control button on the overhead console to open
or close the power sliding door.
However, the power sliding door will not open with the main control button when
...
Power tailgate operation
Push the power tailgate main control button on the overhead console to open
or close the power tailgate. However, the power tailgate will not open with
the main control button when all powe ...
Other Information:
26 Brake Control Solenoid Valve(26/B_VFS) Specifications
Specification
Item SpecificationControl typeN/L (Normal Low)Control pressure kpa(kgf/cm², psi)"9.81 ~ 500.14(0.1 ~ 5.1, 1.42 ~ 72.54)"Current value (mA)50 ~ 850Coil resistance(Ω)5.1 ± 0.3
...
Intake Air Temperature Sensor (IATS) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the IATS connector.
3.
Measure resistance between the IATS terminals 3 and 4.
4.
Check that the resistance is within the speci ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2026 Owners Manual
- Kia Sedona YP 2014-2026 Service Manual
