Kia Sedona: Front Door Outside Handle Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Front Door / Front Door Outside Handle Repair procedures

Replacement

1.	Remove the hole plug (A).

After loosening the mounting bolt, remove the front door outside handle cover (B).

Tightening torque :

7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

3.	Remove the front door outside handle (A) by sliding it backward.

4.	Disconnect the front door outside handle connector (A).

Install in the reverse order of removal.

•	Be sure to install the outside handle pad (A) between the outside handle and the door panel.

•	Make sure that the connectors are connected properly.

•	Make sure that the door locks/unlocks and opens/closes properly.

Front Door Outside Handle Components and Components Location

Component Location 1. Front door outside handle ...

Front Door Latch Components and Components Location

Component Location 1. Front door latch ...

Other Information:

Knock Sensor (KS) Schematic Diagrams
Circuit Diagram ...

Power tailgate opening height user setting
The driver may set the height of a fully opened tailgate by following the below instruction. 1. Confirm the position of the power door ON/OFF button is ON (not depressed). 2. Position the tailga ...

Kia Sedona: Front Door Outside Handle Repair procedures

Front Door Outside Handle Components and Components Location

Front Door Latch Components and Components Location

Other Information:

Categories