Kia Sedona: Seat Belt Buckle Switch (BS) Components and Components Location - SRSCM - Restraint - Kia Sedona YP Service ManualKia Sedona: Seat Belt Buckle Switch (BS) Components and Components Location

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Restraint / SRSCM / Seat Belt Buckle Switch (BS) Components and Components Location

Components

Seat Belt Buckle Switch (BS) Description and Operation
Description The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status inp ...

Seat Belt Buckle Switch (BS) Repair procedures
Removal 1. Disconnect the battery negative cable and wait for at least 30 seconds before beginning to work. 2. Remove the front seat assembly. (Refer to Body - "Front seat") 3. Loosen th ...

Other Information:

Rear Temperature Control Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. 3. Verify that the actuator operates to the recirculation position when 12V is connect ...

Antenna Coil Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Disconnect the 6P connector (B) of the coil ante ...

Categories

Copyright © www.kisedona.com 2016-2026