Kia Sedona: Roof Rack Repair procedures - Body Side Moulding - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Roof Rack Repair procedures

Third generation YP (2014-2020) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Body Side Moulding / Roof Rack Repair procedures

Replacement
[General Type]
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
Remove the roof rack front cover (A) and roof rack rear cover (B).
2.
Remove the roof rack center cover (C).
3.
After loosening the mounting nuts, remove the roof rack assembly (D).

Tightening torque :
3.9 ~ 4.4 N.m ( 0.4 ~ 0.45 kgf.m, 2.9 ~ 3.3 lb-ft )

4.
Install in the reverse order of removal.
   
Replace any damaged clips.

1. Roof rack front cover
2. Roof rack rear cover
3. Roof rack center cover
4. Roof rack assembly

Body Side Moulding
...

Roof Side Moulding Repair procedures
Replacement [General Type]     Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with pro ...

Other Information:

Lighting control
The light switch has a Headlight and a Parking light position. To operate the lights, turn the knob at the end of the control lever to one of the following positions: (1) OFF position (2) Auto ...

IMS (Integrated Memory System) module Components and Components Location
Components Connector Pin Information No.Connecter AConnecter BConnecter CConnecter D1-Batt (+)--2Front tilt motor (Up)GND-Seat rear height sensor3Rear height motor (Up)Batt (+)Slide switch signa ...

Categories

Copyright © www.kisedona.com 2016-2020