Kia Sedona: Rear Upper Arm Repair procedures

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Suspension System / Rear Suspension System / Rear Upper Arm Repair procedures

Rear Shock Absorber Repair procedures

Removal 1. Remove the rear wheel and tire (A) from rear hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)     Be careful not to damage ...

Rear Lower Arm Repair procedures

Removal 1. Remove the rear wheel and tire (A) from rear hub. Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)     Be careful not to damage ...

Other Information:

Steering Column Shroud Panel Repair procedures
Replacement [Steering column shroud lower panel]     Put on gloves to protect your hands.     • When prying with a flat-tip screwdriv ...

Output Speed Sensor Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery") 3. Disconnect the solenoid valve connector (A). 4. M ...