Replacement
[Second row center seat belt retractor]
When installing the belt, make sure not to damage the retractor.
1.
Remove the roof trim assembly.
(Refer t ...
Replacement
[Second row seat belt buckle]
1.
Using a screwdriver or remover, remove the leg outer cover (A).
2.
Remove the second row seat belt buckle (A) after loosening the bolt.
3.
I ...
Other Information:
Knock Sensor (KS) Description and Operation
Description
Knocking is a phenomenon characterized by undesirable
vibration and noise that can cause engine damage. Two Knock Sensors (KS)
are installed inside the V-valley of the cylinder bloc ...
Crankshaft Repair procedures
Disassembly
•
Use fender covers to avoid damaging painted surfaces.
•
To avoid damage, unplug the wiring connectors carefully while holding the con ...