Kia Sedona: Passenger Airbag (PAB) Module Components and Components Location - Airbag Module - Restraint - Kia Sedona YP Service ManualKia Sedona: Passenger Airbag (PAB) Module Components and Components Location

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Restraint / Airbag Module / Passenger Airbag (PAB) Module Components and Components Location

Components

Passenger Airbag (PAB) Module Description and Operation
Description Passenger Airbag (PAB) module is located in the passenger crash pad. The PAB contains 2 firing squibs of airbag and 1 firing squib of active vent. The deployment timing of both 2 fi ...

Passenger Airbag (PAB) Module Repair procedures
Removal 1. Disconnect the battery negative cable and wait for at least 30 seconds before beginning to work. 2. Remove the main crash pad. (Refer to Body - "main crash pad assembly ") ...

Other Information:

Inhibitor Switch Repair procedures
Inspection Power Circuit Inspection 1. Disconnect the Inhibitor switch connector. 2. Ignition KEY "ON"" & Engine "OFF".. 3. Measure voltage between supplied power and ground at inhi ...

Components and Components Location
Components Location 1. Engine Control Module (ECM)2. Barometric Pressure Sensor (BPS)3. Manifold Absolute Pressure Sensor (MAPS)4. Intake Air Temperature Sensor (IATS)5. Engine Coolant Temperatur ...

Categories

Copyright © www.kisedona.com 2016-2026