Kia Sedona: Description and Operation - Evaporative Emission Control System - Emission Control System - Kia Sedona YP Service ManualKia Sedona: Description and Operation

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Emission Control System / Evaporative Emission Control System / Description and Operation

Description
Evaporative Emission Control System prevents fuel vapor stored in fuel tank from vaporizing into the atmosphere. When the fuel evaporates in the fuel tank, the vapor passes through vent hoses or tubes to canister filled with charcoal. The canister temporarily holds the vapor in the charcoal. If ECM determines to draw the gathered vapor into the combustion chambers during certain operating conditions, it will vacuum into intake manifold.
Evaporative Emission Control System
...

Schematic Diagrams
Schematic Diagram Canister Canister is filled with charcoal and absorbs evaporated vapor in fuel tank. The gathered fuel vapor in canister is drawn into the intake manifold by the ECM/PCM when ...

Other Information:

Intake Air Temperature Sensor (IATS) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the IATS connector. 3. Measure resistance between the IATS terminals 3 and 4. 4. Check that the resistance is within the speci ...

Engine Oil Repair procedures
Replacement     • Prolonged and repeated contact with mineral oil will result in the removal of natural fats from the skin, leading to dryness, irritation and ...

Categories

Copyright © www.kisedona.com 2016-2026