Kia Sedona: Parking Brake Repair procedures - Chassis - Maintenance - Kia Sedona YP Service ManualKia Sedona: Parking Brake Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Maintenance / Chassis / Parking Brake Repair procedures

Inspection
Check whether the stroke is within specification when the parking brake pedal is depressed with 66 lb, 294 N(30 kg) of force. Also, the parking brake alone should securely hold the vehicle on a fairly steep grade. If the stroke is more or less than specified, have the parking brake adjusted by an authorized Kia dealer.

Stroke : 8~9 notch

Drive Shafts and Boots Repair procedures
Inspection 1. Check the drive shaft boots for loose clamps, cracks, grease leaks, kinks or damage. ...

Power Steering Fluid Repair procedures
Inspection Check that the power steering fluid is filled up to the level of MAX level mark on the reservoir. ...

Other Information:

Engine Cover Repair procedures
Removal and Installation 1. Remove the engine cover (A).     • Lift up the lower end of engine cover, then left and right alternately. • When install ...

Hazard Lamp Switch Repair procedures
Inspection 1. Check for continuity between terminals. If the continuity is not as specified, replace the hazard lamp switch. Connector Pin Information No.DescriptionNo.Description1ILL+ (TAIL)2 ...

Categories

Copyright © www.kisedona.com 2016-2026