Kia Sedona: Master Cylinder Components and Components Location - Brake System - Brake System - Kia Sedona YP Service ManualKia Sedona: Master Cylinder Components and Components Location

Third generation YP (2014-2021) / Kia Sedona YP Service Manual / Brake System / Brake System / Master Cylinder Components and Components Location

Components

1. Reservoir cap
2. Reservoir
3. Grommet
4. Master cylinder
5. O-ring

Brake Booster Repair procedures
Brake Booster Operating Test For simple checking of the brake booster operation, carry out the following tests. 1. Run the engine for one to two minutes, and then stop it. If the pedal depress ...

Master Cylinder Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the air cleaner assembly (A). 3. Disconnect the brake fluid level switch connector (B), and rem ...

Other Information:

Heated Oxygen Sensor (HO2S) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S terminals 3 and 4. 4. Check that the resistance is within the speci ...

CVVT Oil Control Valve (OCV) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the OCV connector. 3. Measure resistance between the OCV terminals 1 and 2. 4. Check that the resistance is within the specifi ...

Categories

Copyright В© www.kisedona.com 2016-2021