Kia Sedona: IMS (Integrated Memory System) module Repair procedures - IMS (Integrated Memory) - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: IMS (Integrated Memory System) module Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body Electrical System / IMS (Integrated Memory) / IMS (Integrated Memory System) module Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver''s seat assembly.
(Refer to Body - "Front Seat Assembly")
3.
Loosening the IMS unit mounting screws (A).

4.
Disconnect the IMS unit connectors (B) and then remove the IMS unit (A).

Installation
1.
Connect the IMS unit connectors.
2.
Install the IMS unit.
3.
Install the driver''s seat assembly.
4.
Connect the negative (-) battery terminal.
IMS (Integrated Memory System) module Schematic Diagrams
Circuit Diagram ...

IMS Control Switch Components and Components Location
Components ...

Other Information:

Rear Mode Control Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when 12V is connected t ...

AC Inverter Switch Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the crash pad lower switch (A) after loos ...

Categories

Copyright © www.kisedona.com 2016-2026