Kia Sedona: Height Adjust Repair procedures - Front Seat Belt - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Height Adjust Repair procedures

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Front Seat Belt / Height Adjust Repair procedures

Replacement
1.
Remove the center piller upper trim.
(Refer to Interior Trim - "Center Piller Trim")
2.
After loosening the mounting bolts, remove the height adjust (A).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5kgf.m, 28.9 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.
   
Replace any damaged clips.
Height Adjust Components and Components Location
Component Location 1. Height adjust ...

Front Seat Belt Buckle Components and Components Location
Component Location 1. Front seat belt buckle ...

Other Information:

Water Temperature Control Assembly Components and Components Location
Components 1. Water pipe 2. Throttle body coolant hose & pipe3. Water temperature control assembly4. O-ring ...

Air bag Warning Light
This warning light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position. - It illuminates for approximately 6 seconds and then goes off. When there is ...

Categories


Copyright В© www.kisedona.com 2016-2025