Kia Optima Manuals

Kia Sedona: Front Seat Belt Buckle Repair procedures - Front Seat Belt - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Front Seat Belt Buckle Repair procedures

Third generation YP (2014-2020) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Front Seat Belt / Front Seat Belt Buckle Repair procedures

Replacement
1.
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
2.
Disconnect the front seat belt buckle connector wiring (A).

3.
After loosening the mounting bolt, remove the front seat belt buckle (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5kgf.m, 28.9 ~ 39.8 lb-ft)

4.
Install in the reverse order of removal.
   
Make sure that the connectors are plugged in properly.
Front Seat Belt Buckle Components and Components Location
Component Location 1. Front seat belt buckle ...

Rear Seat
...

Other Information:

Press start button again (for smart key system)
This warning message illuminates if you can not operate the Engine Start/Stop Button when there is a problem with the Engine Start/Stop Button system. It means that you could start the engin ...

Manifold Absolute Pressure Sensor (MAPS) Repair procedures
Inspection 1. Connect the GDS to the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Pressure [kPa (kgf/cmВІ, psi)]Output Voltage (V) [Ref=5V]20.0 (0 ...

Categories

Copyright В© www.kisedona.com 2016-2020